Enable PIE support so the BL31 firmware can be loaded from anywhere
within the OCRAM (SRAM). For the PIE support we only need to replace the
BL31_BASE define by the BL31_START symbol which is a relocatable and we
need to enable it by setting ENABLE_PIE := 1.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I33c8e35c35112d70d2725eebe484a853a8aad9e0
Introduce BL31_SIZE define and calculate the limit based on the
BL31_BASE and the BL31_SIZE define. Also make use of SZ_128K to make it
easier to read. This is required for later BL31 PIE support since it
drops the calculation based on the BL31_LIMIT and BL31_BASE.
While on it remove the duplicated <lib/utils_def.h> include.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: Ifca40bd5682ef993db986439115abd9e9a66a5b2
No functional change.
Use the setup_page_tables() helper function which does the three calls
for us. Also the function has some logging support which will be nice
during debugging.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I2f0182f19300a3a57bbeb7e2107c5fb5525dd0c1
No functional change.
Introduce the bl_regions array to gather all regions and make use of the
MAP_REGION_FLAT() macro. The array is than passed to mmap_add() to map
all regions. While on it introduce some defines so the addr, size and
flags can be read more easily.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: Id5849d2a7326a943927f458f1c6abbc041f5be18
In order for HAB to perform operations, memory regions has to be mapped
in TF-A, which HAB ROM code would use internally.
Include those memory blocks for i.MX8MN SoC. Of a special note, the DRAM
block is mapped with complete size available on the platform and uses
MT_RW attributes, this is required to minimize the size of translation
tables and provide a possibility to exchange the execution results
between EL3 and EL1&2, see details in [1].
Link: [1]: https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/16880
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Change-Id: If7a2b718658db452871e1ae56b71a4983e8ef2fe
CAAM provides serial output during initialization, but the serial init
occurs after CAAM. This leads to serial output produced by CAAM init
function to be omitted and not displayed.
Change the order of initialization and call CAAM init after Serial. This
has no impact as Serial does not require CAAM to be initialized upfront.
Fixes: 2502709f60de ("plat: imx8m: Add caam module init on imx8m")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Jacky Bai <ping.bai@nxp.com>
Change-Id: I09c0a5474a1babfb0b53c4455891689ec08b5bdb
Add trusty support for imx8mn, default load address and
size of trusty are 0xbe000000 and 0x2000000.
Signed-off-by: Ji Luo <ji.luo@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I63fd5159027d7400b8c6bfc03193dd1330c43140
Enable the OCRAM_S TZ for secure protection by default on
i.MX8MN/i.MX8MP. And lock the ocram secure access configure
on i.MX8MM/i.MX8MP.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I2e24f4b823ee5f804415218d5c2e371f4e4c6fe1
Enable the CSU init on i.MX8M SoC family. The 'csu_cfg' array
is just a placeholder for now as example with limited config listed.
In real use case,user can add the CSU config as needed based on system design.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I1f7999efa346f18f6625ed8c478d088ed75f7833
Replace those RDC config related magic numbers with enum type
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I6245ccfa74d079179dc0f205980c2daf5c7af786
