MISRA Violation: MISRA-C: 2012 R.10.1
- The operand to the operator does not have an essentially
unsigned type.
Signed-off-by: HariBabu Gattem <haribabu.gattem@amd.com>
Change-Id: I0f974e9d6f63dddfab55d55c952a57645d931e40
MISRA Violation: MISRA-C:2012 R.4.6
- Using basic numerical type int rather than a typedef
that includes size and signedness information.
Signed-off-by: HariBabu Gattem <haribabu.gattem@amd.com>
Change-Id: I3779f7b6e074e33cb66ace3bef2117029badce1e
MISRA Violation: MISRA-C:2012 R.4.6
- Using basic numerical type int rather than a typedef
that includes size and signedness information.
Change-Id: Id85e69b29b124052b4a87462ce27fcdfc00c13c9
Signed-off-by: HariBabu Gattem <haribabu.gattem@amd.com>
ProvenCore requires secure SGIs to be handled at S-EL1. This patch
overrides the default ZynqMP configuration to handle them at EL3 in case
ProvenCore SPD is enabled.
Signed-off-by: Jeremie Corbier <jeremie.corbier@provenrun.com>
Signed-off-by: Mélanie Favre <melanie.favre@provenrun.com>
Change-Id: I2e36d2983f82fbb9b7acf7e18791b8ed92811b60
* changes:
chore(zynqmp): fix comment style in zynqmp_def.h
chore(versal): add missing dot at the end of sentence
fix(zynqmp): remove additional 0x in %p print
fix(versal): fix Misra-C violations in bl31_setup and pm_svc_main
Add missing space in one line comment to follow common coding style.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: Idebf8f34bf48444ee20a68ac3e6fd7f5a41bf8b0
%p is already printing value in hex that's why 0x prefix is not needed.
Origin message looks like this
"NOTICE: Can't read DT at 0x0x100000"
and after fixing
"NOTICE: Can't read DT at 0x100000"
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: If83c485a61441f6105d8cbd797f04060dfce2817
GICD reg write must complete before core goes to idle
mode. Achieve this with dsb() barrier instruction in IPI
ISR
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Change-Id: I5af42ca901567ee5e54a5434ebe3e673a92cb9be
The commit 389594dfa7 ("fix(zynqmp): move bl31 with DEBUG=1 back to OCM")
tried to move address to OCM but address was actually out of OCM and likely
it was typo. Correct default address should be 0xfffe5000. If TF-A size is
bigger please select location DDR which should be fine for DEBUG cases.
Reported-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: I055f3a59cdca527f6029fcc2a19d76be35924d24
Currently, the AFIFM6_WRCTRL bus-width configuration is not happening
correctly due to the wrong register write mask value. To fix this issue
updated the mask value handling logic.
Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
Signed-off-by: Akshay Belsare <Akshay.Belsare@amd.com>
Acked-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Change-Id: I8443c369a84339018310cfb6cd498d21474da3e4
When configuration option ZYNQMP_SECURE_EFUSES is defined then Xilinx
ZynqMP's PS eFuses can only be accesses from secure state.
This enables eFuses to be reserved and protected only for security use
cases for example in OP-TEE.
Change-Id: I866905e35ce488f50f5f6e1b4667b08a9fa2386d
Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
This patch gathers miscellaneous minor fixes to the xilinx
platforms like tabs for indentation and misra 10.1 warnings.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I4cdb89ffec7d5abc64e065ed5b5e5d10b30ab9f9
MISRA Violation: MISRA-C:2012 R.10.1
1) The expression of non-boolean essential type is being interpreted as a
boolean value for the operator.
2) The operand to the operator does not have an essentially unsigned type.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I97bbc056f4fee167742429e144144ba793bf77b3
By default placing bl31 to addrexx 0x1000 is not good. Because this
location is used by U-Boot SPL. That's why move TF-A back to OCM where it
should be placed. BL31_BASE address exactly matches which requested address
for U-BOOT SPL boot flow.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I608c1b88baffec538c6ae528f057820e34971c4c
Add support for new xck24 device.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I913a34d5a48ea665aaa4348f573fc59566dd5a9b
MISRA Violation: MISRA-C:2012 R.8.6
- Function is declared but never defined.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I0df53ef4b2c91fa8ec3bf3e5491bf37dd7400685
MISRA Violation: MISRA-C:2012 R.4.6
- Using basic numerical type int rather than a typedef
that includes size and signedness information.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I9fb686e7aa2b85af6dfcb7bb5f87eddf469fb85c
MISRA Violation: MISRA-C:2012 R.8.13
- The pointer variable points to a non-constant type
but does not modify the object it points to. Consider
adding const qualifier to the points-to type.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Ifd06c789cfd3babe1f5c0a17aff1ce8e70c87b05
Optimizing the pinctrl_functions structure. Remove the pointer to
array of u16 type which consumes a lot of memory (64bits pointer to
array + 16B for END_OF_GROUPS + almost useless 8bits on every entry
which is the same for every group) and add two new members of type
u16 and u8 with the name called group_base and group_size
respectively.
The group_base member contains the base value of pinctrl group whereas
the group_size member contains the total number of groups requested
from the pinctrl function.
Overall, it saves around ~2KB of RAM and ~0.7KB of code memory.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I79b761b45df350d390fa344d411b340d9b2f13ac
MISRA Violation: MISRA-C:2012 R.8.3
- Declaration uses a different parameter name than the one present in the
definition.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Id0521afd7383df13870710b7dd2894e788896e5e
MISRA Violation: MISRA-C:2012 R.8.4
- Function definition does not have a visible prototype.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I50a2c1adf2e099217770ac665f135302f990b162
Enable ARM_XLAT_TABLES_LIB_V1 as ZynqMP is using
v1 library of translation tables.
With upstream patch d323af9e3d,
the usage of MAP_REGION_FLAT is referring to definition in file
include/lib/xlat_tables/xlat_tables_v2.h but while preparing
xlat tables in lib/xlat_tables/xlat_tables_common.c it is referring
to include/lib/xlat_tables/xlat_tables.h which is v1 xlat tables.
Also, ZynqMP was using v1 so defined ARM_XLAT_TABLES_LIB_V1 to
use v1 xlat tables everywhere.
This fixes the issue of xlat tables failures as it takes v2
library mmap_region structure in some files and v1 in other
files.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Ibc0e1c536e19f4edd6a6315bf1b0dfcec33e2fdc
MISRA Violation: MISRA-C:2012 R.14.4
The controlling expression of an if statement and the controlling
expression of an iteration-statement shall have essentially Boolean type.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I8f3f6f956d1d58ca201fb5895f12bcaabf2afd3b
MISRA Violation: MISRA-C:2012 R.15.7
- All if . . else if constructs shall be terminated
with an else statement.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: If921ca7c30b2feea6535791aa15f4de7101c3134
MISRA Violation: MISRA-C:2012 R.15.6
- The body of an iteration-statement or a selection-statement shall be
a compound statement.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I0fc8eeac0e592f00297a1ac42a1ba3df1144733b
MISRA Violation: MISRA-C:2012 R.7.2
- A "u" or "U" suffix shall be applied to all integer constants that are
represented in an unsigned type.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Ieeff81ed42155c03aebca75b2f33f311279b9ed4
MISRA Violation: MISRA-C:2012 R.10.3
- The value of an expression shall not be assigned to an object with a
narrower essential type or of a different essential type category.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I5a60c66788d59e45f41ceb81758b42ef2df9f5f7
Changing the log message from notice to verbose, to save some space
and that leads to successfull compilation.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Iee5a808febf211464eb8ba6f0377f79378333f5d
Fix coding style violations and alignments:
- Remove additional newlines in headers
- Remove additional newlines in code
- Add newline to separate variable from the code
- Use the same indentation in platform.mk
- Align function parameters
- Use tabs for indentation in kernel-doc format
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I0b12804ff63bc19778e8f21041f9accba5b488b9
If APU is in suspending state and if wakeup request comes then
PMUFW returns error which is not handled at ATF side.
To fix this, get the APU node status before calling wakeup and
return error if found in suspending state.
Here, we can not handle the error code of pm_req_wakeup() from PMUFW
because ATF is already calling pm_client_wakeup() before calling
pm_req_wakeup().
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I18d47384e46e22ae49e804093ad0641b7a6349e2
There is no reason to have even one additional useless line that's why
remove it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: Icc3c74249dfe64173aa5c88fb0f9ffe7576fc2aa
This API returns version of supported APIs.
Here, there are three cases to check API version by using feature
check implementation.
1. Completely implemented in TF-A: I mean the EEMI APIs which are
completely implemented in the TF-A only. So check those IDs and
return appropriate version for the same. Right now, it is base
version.
2. Completely implemented in firmware: I mean the EEMI APIs which are
completely implemented in the firmware only. Here, TF-A only passes
Linux request to the firmware to get the version of supported API. So
check those IDs and send request to firmware to get the version and
return to Linux if the version is supported or return the error code
if the feature is not supported.
3. Partially implemented (Implemented in TF-A and firmware both):
First check dependent EEMI API version with the expected version in
the TF-A. If the dependent EEMI API is supported in firmware then
return its version and check with the expected version in the TF-A.
If the version matches then check for the actual requested EEMI API
version. If the version is supported then return version of API
implemented in TF-A.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I73f20d8222c518df1cda7879548b408b130b5b2e
Currently all EEMI API has its own implementation in TF-A which is
redundant. Most EEMI API implementation in TF-A does same work. It
prepares payload received from kernel, sends payload to firmware,
receives response from firmware and send response back to kernel.
So use common interface for EEMI APIs which has similar functionality.
This will optimize TF-A code.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I07325644a1fae80211f2588d5807c21973f6d48f
Adds support to get the xilfpga library version and feature list info.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: Iff10ad2628a6a90230c18dc3aebf9dde89f53ecd
Firmware supports new IOCTL for different purposes. To avoid
maintaining new IOCTL IDs in ATF, pass IOCTL call to firmware
for IOCTL IDs implemented in firmware.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: Ie14697c8da9581b0f695f4d33f05161ece558385
Update the MAX_XLAT_TABLES as the memory map has been
added for the dtb to accomodate in DDR address.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I46225673f40f123cdab38efefb038604da119b58
Actually BL31_LIMIT is set to 0xffffffff but that doesn't work correctly
with bl31.ld since ". = ALIGN(((1) << (12)));" will try to fill aligned up
to 0x100000000 included, but the RAM size is 0xffffffff, so this leads to
this build error:
```
bl31.elf section `coherent_ram' will not fit in region `RAM'
/home/br-user/git/upstream/ci-tests/zynqmp_zcu102/host/bin/aarch64-buildroot-linux-uclibc-ld: region `RAM' overflowed by 1 byte
```
So let's move BR31_LIMIT to 0x100000000 giving 1 byte more room to fill RAM
up to the end.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Change-Id: Ic0edb8ed159e013f60598a9dd4f50adbf656b38d
Currently only UART0 is handled as console device, fix the
code to support UART1 as console also.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I08f69b65b78b967ceb7159f4a467aa5982b1f791
With new gcc11.2 by default the -mbranch-protection is
set to "standard" which is leading to increase the text
section by 4Kb. As the ZynqMP uses the ARMv8 architecture,
so there is no impact when we disable the branch protection.
These instructions do not provide the branch protection in
architectures before Armv8.3-A.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I36f7a55abf99f50df2ee265255598d83b1f480c6
Add support for runtime feature configuration which are running on the
firmware. Add new IOCTL IDs like IOCTL_SET_FEATURE_CONFIG and
IOCTL_GET_FEATURE_CONFIG for configuring the features.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I976aef15932783a25396b2adeb4c8f140cc87e79
