Add DT_SDMMC2_COMPAT define in stm32mp1_def.h file in platform.
It allows the use of the compatible in platform code.
Change-Id: I535ad67dd133bab59cf81881adaef42d8e88632c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On STM32MP13, two new SD1 and SD2 IO compensations cells are added,
for SDMMC1 and SDMMC2. They have to be managed the same way as the
main compensation cell.
Change-Id: Ib7aa648d65fc98e1613bfb46b0e7dd568fd21002
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The nominal voltage for VDDCPU when Cortex-A7 runs at 650MHz is 1.25V
on STM32MP13. VDDCORE should be set at 1.25V as well.
This is necessary, as the PMIC values in its NVMEM are 1.2V.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I3c24fe4cd68c7bf143cf9318ab38a15d6d41b5d2
This field is now declared on the 10 LSB bits on STM32MP13.
Several possible values are specified in the Reference Manual, and
indicate an open or closed device. Other values lead to a system panic.
Change-Id: I697124a21db66a56e7e223d601aa7cf44bb183c4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Update USB and DFU descriptor used for STM32MP13x
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: I6e8111d279f49400a72baa12ff39f140d97e1c70
Add new clock driver for STM32MP13. Split the include file to manage
either STM32MP13 or STM32MP15.
Change-Id: Ia568cd12b1d5538809204f0fd2224d51e5d1e985
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
The IDC register from DBGMCU is duplicated in SYSCFG. As SYSCFG is
always accessible, get chip ID and revision ID from there on STM32MP13.
Change-Id: Ib0b6e8f68a2934a45ec0012f69db6c12a60adb17
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On STM32MP13, there is only 1 DDR port, hence only 1 TZC400 filter.
Change-Id: I4f6750022cdaf658cd209a4bf48a6cdb0717020e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Increase the fixed regulator number that needs to be
2 for STM32MP13.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: Ica990fe9a6494b76aed763d2d353f5234fed7cea
The header must now include by default at least an extra padding
header, increasing the size of the header to 512 bytes (0x200).
This header will be placed at the end of SRAM3 by BootROM, letting
the whole SYSRAM to TF-A.
The boot context is now placed in SRAM2, hence this memory has to be
mapped in BL2 MMU. This mapping is done for all SRAMs in a 2MB area.
Change-Id: I50fcd43ecd0ba2076292b057566efe6809b9971a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the new field for the new header v2.0.
Force MP13 platform to use v2.0.
Removing unused fields in boot_api_context_t for STM32MP13.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iac81aad9a939c1f305184e335e0a907ac69071df
Add the IP addresses that are STM32MP13 and update the ones for
which the base address has changed.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iea71a491da36f721bfd3fbfb010177e2a6a57281
Add the new part numbers and adapt the functions that use them.
There is no package number in OTP as they all share the same GPIO
banks.
This part is then stubbed for STM32MP13.
Change-Id: I13414326b140119aece662bf8d82b387dece0dcc
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On STM32MP13, the chip revision Z is 0x1001, contrary to STM32MP15,
for which it was 0x2001.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: If65482e824b169282abb5e26ca91e16ef7640b52
The backup register used on STM32MP15 to save the boot interface for
the next boot stage was 20. It is now saved in backup register 30
on STM32MP13.
Change-Id: Ibd051ff2eca7202184fa428ed57ecd4ae7388bd8
Signed-off-by: Yann Gautier <yann.gautier@st.com>
STM32MP13 is a single Cortex-A7 CPU, always return true in
stm32mp_is_single_core() function.
Change-Id: Icf36eaa887bdf314137eda07c5751cea8c950143
Signed-off-by: Yann Gautier <yann.gautier@st.com>
* GPIO: On STM32MP13, there are no banks GPIOJ, GPIOK and GPIOZ.
* STM32MP13 is a single Cortex-A7 CPU: remove reset from MPU1
and reset from MCU traces
* There is no MCU on STM32MP13. Put MCU security management
under STM32MP15 flag.
* The authentication feature is not supported yet on STM32MP13,
put the code under SPM32MP15 flag.
* On STM32MP13, the monotonic counter is managed in ROM code, keep
the monotonic counter update just for STM32MP15.
* SYSCFG: put registers not present on STM32MP13 under STM32MP15
flag, as the code that manages them.
* PMIC: use ldo3 during DDR configuration only for STM32MP15
* Reset UART pins on USB boot is no more required.
Change-Id: Iceba59484a9bb02828fe7e99f3ecafe69c837bc7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
SYSRAM is only 128KB and starts at 0x2FFE0000.
SRAMs are added.
BL2 code and DTB sizes are also reduced to fit in 128KB.
Change-Id: I25da99ef5c08f8008ff00d38248d61b6045adad4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
STM32MP13 is a variant of STM32MP1, with a single Cortex-A7, and no
Cortex-M4.
There is only one DDR port.
SP_min is not supported, only OP-TEE can be used as monitor.
STM32MP13 uses the header v2.0 format for stm32image generation
for BL2.
Change-Id: Ie5b0e3230c5e064fe96f3561fc5b3208914dea53
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The stm32image tool is updated to manage new header v2.0 for BL2
images.
Add new structure for the header v2.0 management.
Adapt to keep compatibility with v1.0.
Add the header version major and minor in the command line
when executing the tool, as well as binary type (0x10 for BL2).
Change-Id: I70c187e8e7e95b57ab7cfad63df314307a78f1d6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
This patch applies CVE-2022-23960 workarounds for Cortex-A75,
Cortex-A73, Cortex-A72 & Cortex-A57. This patch also implements
the new SMCCC_ARCH_WORKAROUND_3 and enables necessary discovery
hooks for Coxtex-A72, Cortex-A57, Cortex-A73 and Cortex-A75 to
enable discovery of this SMC via SMC_FEATURES. SMCCC_ARCH_WORKAROUND_3
is implemented for A57/A72 because some revisions are affected by both
CVE-2022-23960 and CVE-2017-5715 and this allows callers to replace
SMCCC_ARCH_WORKAROUND_1 calls with SMCCC_ARCH_WORKAROUND_3. For details
of SMCCC_ARCH_WORKAROUND_3, please refer SMCCCv1.4 specification.
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ifa6d9c7baa6764924638efe3c70468f98d60ed7c
When trying to boot from an SD card with STM32MP_EMMC_BOOT enabled,
booting fails with:
ERROR: Got unexpected value for active boot partition, 0
ASSERT: plat/st/common/bl2_stm32_io_storage.c:285
because SD cards don't provide a boot partition. So only try reading
from such a partition when booting from eMMC.
Fixes: 214c8a8d08 ("feat(plat/st): add STM32MP_EMMC_BOOT option")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Change-Id: I354b737a3ae3ea577e83dfeb7096df22275d852d
Add the possibility to configure console UART baudrate, it can be passed
as a command line parameter with STM32MP_UART_BAUDRATE. The default value
remains 115200.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I000df70c10b2b4dac1449556596f9820c36cf243
With gcc-11, the -Wformat-signedness warning complains about enum values
that should be printed as unsigned values. But the current version of
compiler used in CI states that this parameter is signed. Just cast the
value then.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ic0655e5ba9c44fe6abcd9958d7a9972f5de3b7ef
* changes:
feat(stm32mp1): enable format-signedness warning
fix(stm32mp1): correct types in messages
fix(st-pmic): correct verbose message
fix(st-sdmmc2): correct cmd_idx type in messages
fix(st-fmc): fix type in message
fix(mtd): correct types in messages
fix(usb): correct type in message
fix(tzc400): correct message with filter
fix(psci): correct parent_node type in messages
fix(libc): correct some messages
fix(fconf): correct image_id type in messages
fix(bl2): correct messages with image_id
Add the flag -Wformat-signedness to TF_CFLAGS for STM32MP1.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I6af18778902b0a4dae1c08735d2d070ef3d137ce
The PIE compilation is used only for BL32, move the ENABLE_PIE to
sp_min-stm32mp1.mk file. Override PIE flags, as sp_min.mk file is
included after the flags are set in Makefile.
The BL2_IN_XIP_MEM was added for a feature not yet upstreamed.
It is then removed from platform.mk file.
Change-Id: If055e51e0f160f99cd4e4cf68ca718d4d693119c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
tamp_bkpr() returns a register address. So use uintptr_t instead of
uin32_t.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Change-Id: I5eddfa525465313dadfec18d128248a968ba74e2
Add the SZ_* macros from 32 to 2G.
This allows removing some defines in raw NAND driver
and STM32MP1 boot device selection code.
Change-Id: I3c4d4959b0f43e785eeb37a43d03b2906b7fcfbc
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
From the new binding, the RCC become secured based on the new
compatible. This must be done only from the secure OS initialisation.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I7f0a62f22bfcca638ddaefc9563df00f89f01653
Add an early UART console to ease debug before UART is fully configured.
This is done under flag STM32MP_EARLY_CONSOLE in the first STM32MP1
platform function called (bl2_el3_early_platform_setup()). It uses the
parameters defined for crash console: STM32MP_DEBUG_USART* macros.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Id6be62368723a0499e97bbf56fb52c166fcbdfad
* changes:
feat(stm32mp1): warn when debug enabled on secure chip
fix(stm32mp1): rework switch/case for MISRA
feat(st): disable authentication based on part_number
* changes:
feat(st-gpio): do not apply secure config in BL2
feat(st): get pin_count from the gpio-ranges property
feat(st-gpio): allow to set a gpio in output mode
refactor(st-gpio): code improvements
The "ngpios" property is deprecated and may be removed.
Use the "gpio-ranges" property where the last parameter of that
property is the number of available pins within that range.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Change-Id: I28295412c7cb1246fc753cff0d447b6fdcdc4c0f
Add a banner that inform user that debug is enabled
on a secure chip.
Change-Id: Ib618ac1332b40a1af72d0b60750eea4fc36a8014
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Avoid the use of return inside switch/case in stm32mp_is_single_core().
Although this MISRA rulre might not be enforced, we align on what is done
for stm32mp_is_auth_supported().
Change-Id: I00a5ec1b18c55b4254af00c9c5cf5a4dce104175
Signed-off-by: Yann Gautier <yann.gautier@st.com>
STM32MP15xA and STM32MP15xD chip part numbers don't
support the secure boot.
All functions linked to secure boot must not be used
and signed binaries are not allowed on such chip.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I5b85f322f5eb3b64415e1819bd00fb2c99f20695
The monotonic counter is stored in an OTP fuse.
A check is done in TF-A.
If the TF-A version is incremented, then the counter will be updated
in the corresponding OTP.
Change-Id: I6e7831300ca9efbb35b4c87706f2dcab35affacb
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Mathieu Belou <mathieu.belou@st.com>
Use dt_find_otp_name() to retrieve platform OTP information
from device tree, directly or through stm32_get_otp_index() and
stm32_get_otp_value() platform services.
String definitions replace hard-coded values, they are used to call
this new function.
Change-Id: I81213e4a9ad08fddadc2c97b064ae057a4c79561
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Rename driver file to BSEC2.
Split header file in IP and feature parts.
Add functions to access BSEC scratch register.
Several corrections and improvements.
Probe the driver earlier, especially to check debug features.
Change-Id: I1981536398d598d67a19d2d7766dacc18de72ec1
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Used by driver parsing this node to get information.
Change-Id: I50623a497157adf7b9da6fafe8d79f6ff58c0ebc
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
This warning can only be removed if the version is newer than v1.6.0.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I472a8e552305b563447e8148074a5c0970b429e3
Remove stm32mp_incr_shrefcnt(), stm32mp_decr_shrefcnt(),
stm32mp_incr_refcnt() and stm32mp_decr_refcnt() that are unused.
The file is then just removed.
Change-Id: I09ee23c02317df5d8f71cbc355d3ed4a67ce2749
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Due to stm32mp_shres_helpers.h removal, the debug.h header is no more
included. It should then be added to stm32mp1_boot_device.c.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I397911ac05fdff464c010cf3b2e04320a781b4aa
Add support for enabling the FWU multi bank boot feature on the
platform.
Currently, this feature is supported on the STM32MP157C-DK2 board,
which boots off a uSD card. Also, support has been enabled when
booting from a FIP image.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: Ia69e858461e2daf599d41d66d7ff2ccae0c341c2
With the FWU Multi Bank update feature, the platform can boot from one
of multiple banks(partitions). Pass the value of bank from which the
platform has booted as boot index to the Update Agent. The Update
Agent will match this boot index value against the active_index field
in the metadata, and update the metadata if there is a mismatch.
Fow now, the mechanism to pass the boot index is platform specific. On
the STM32MP1 platform, the boot index value is passed through a
memorey mapped TAMP register on the SoC.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I0aa665ff9c1db95be8ae19ed8de6d866587d6850
Add support for reading the FWU metadata partition. The metadata
partition stores information on the current active bank along with
information on all the FWU updatable images on the platform. This
information is then used to identify the image to be booted.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I66bc5ac718c21a49c504e698b5b1f5c4daed2d08
With the FWU multi bank boot feature enabled, the platform can boot
from one of the multiple banks(partitions) containing the firmware
images. The bank whose firmware components are to be booted is read
from the FWU metadata structure -- the image to be booted is thus
derived by reading the metadata.
Read the metadata and set the image spec of the corresponding image
type to point to the partition from which the image is to be booted.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I3dfdc7e9202859e917ec4e1f7d1855aad42c6b70
Add GUID's for identifying the firmware image type. With the FWU
multi bank boot feature enabled, these GUID values are used to
identify the firmware image to be booted. This is done by matching
GUID values of images in the io policy table with the Image GUID value
that is read from the FWU metadata structure.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: Id9751f02f95fc48ef68e4e3f9f0ddbf6d6319d3c
With the FWU multi bank feature enabled, the identification of
firmware image type is done using the image type GUID instead of
binary_type field.
Add GUID values for the FIP image which can be updated through
the FWU firmware update feature. The GUID values are used in
identifying the firmware images.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: If7d9356aa8d2bb3fbcbc87100e6972f1a1862921
Use STM32MP_HEADER_RESERVED_SIZE macro instead of a fixed value 0x3000
in linker script.
Change-Id: I2702285c15aebaa1304a891c8aaabc949a912ba6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This new function is used to fill the register(s) responsible to enable
high speed mode for pad in low voltage (<2.7V).
Change-Id: Ib8abc6628bdf51bbe6a866bc6a9bcdeb4a84a8f4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add enable_io_comp_cell and disable_io_comp_cell local helpers
to enable or disable an IO compensation cell.
Change-Id: I65295298a7ece572ae939e2db93d10b188de0f9e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Use the clock framework functions in SYSCFG driver instead of dedicated
functions.
Change-Id: Ifb50a5207e8cecef1c80d86e2de4d70ab6bf8b8b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Use a timeout during IO compensation enable function, when
waiting for ready status. If timeout expires, print a warning
message, to indicate that the SoC recommendation is not followed.
Change-Id: I98c7dcb1364b832f4f4b5fc9a0b85a3741a8af4b
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Because the BL2 is not relocated, the usage of BL2_IN_XIP_MEM
can be used. It reduces the binary size by removing all relocation
sections. XIP will not be used when STM32MP_USE_STM32IMAGE is
defined. Introduce new definitions for SEPARATE_CODE_AND_RODATA.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Ifd76f14e5bc98990bf84e0bfd4ee0b4e49a9a293
Simplify the BL2 MMU mapping and reduce the memory regions
number. Split the XLAT define between BL2 and BL32 as binaries
do not share the same tables anymore.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iaf09e72b4cc29acbe376f6f1cd2a8116c793ba26
This allows reducing MMU tables, and as there is nothing after ROM code
in memory mapping, this has no impact.
Change-Id: If51facb96a523770465cb06eb1ab400f75d26db3
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Only NAND memory map area can be of interest for BL2 in the
DEVICE2 area. Map DEVICE2 under STM32MP_RAW_NAND flag.
Change-Id: I7e3b39579e4a2525b25cb1987d6ec38038d0de2b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
* changes:
refactor(st-ddr): move basic tests in a dedicated file
refactor(st-ddr): reorganize generic and specific elements
feat(stm32mp1): allow configuration of DDR AXI ports number
refactor(st-ddr): update parameter array initialization
feat(st-ddr): add read valid training support
refactor(stm32mp1): remove the support of calibration result
fix(st-ddr): correct DDR warnings
As the UART is already initialized, no need to check for UART clock
or reset in next BL. An issue can appear if the next BL device tree
(e.g HW_CONFIG) doesn't use the same clocks or resets (like SCMI ones).
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I044ef2386abe2d3dba5a53c3685440d64ca50a4f
These basic tests are generic and should be used independently of the
driver, depending on the plaftorm characteristics.
Change-Id: I38161b659ef2a23fd30a56e1c9b1bd98461a2fe4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@foss.st.com>
stm32mp_ddrctl structure contains DDRCTRL registers definitions.
stm32mp_ddr_info contains general DDR information extracted from DT.
stm32mp_ddr_size moves to the generic side.
stm32mp1_ddr_priv contains platform private data.
stm32mp_ddr_dt_get_info() and stm32mp_ddr_dt_get_param() allow to
retrieve data from DT. They are located in new generic c/h files in
which stm32mp_ddr_param structure is declared. Platform makefile
is updated.
Adapt driver with this new classification.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I4187376c9fff1a30e7a94407d188391547107997
A new flag STM32MP_DDR_DUAL_AXI_PORT is added, and enabled by default.
It will allow choosing single or dual AXI ports for DDR.
Change-Id: I48826a66a6f4d18df87e081c0960af89ddda1b9d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On closed chips, it is not allowed to open debug. The BSEC debug
register can not be rewritten.
On open chips, the debug is already open, no need to rewrite this
register. This part of code is just removed.
An INFO message is displayed if debug is disabled.
The freeze of the watchdog during debug is also removed.
In case of debug, this must be managed by the software that enables
the debugger.
Change-Id: I19fbd3c487bb1018db30fd599cfa94fe5090899f
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add function headers to improve readability.
Add asserts when required.
Use RCC_BASE address.
Change-Id: Ia545293f00167b6276331a986ea7aa08c006e004
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
According to ST Application note AN5256 [1], the minimum reset pulse
duration should be set to 31ms on boards powered with discrete
regulators.
[1] https://www.st.com/resource/en/application_note/dm00561921.pdf
Change-Id: Ib6ed029ee8a4b95f75a80948fdd2154b4ebe484f
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Use regulator framework to get CPU and VDD power supplies.
Change-Id: Ice745fb21ff10e71ef811e747165499c2e19253e
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
print_pmic_info_and_debug() prints the PMIC version ID and displays
regulator information if debug is enabled.
It is under DEBUG flag and called after initialize_pmic() in BL2.
Change-Id: Ib81a625740b7ec6abb49cfca05e44c69efaa4718
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
SYSCFG can be initialized later, after console is up, to display the
warnings or messages it could issue.
PMIC should be initialized earlier, before SYSCFG init.
Change-Id: Icc3a1366083a1b1fde7f0e173645449b4c04c49b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This is mainly a clock interface with clk_ops callbacks.
Those callbacks are: enable, disable, get_rate, set_parent,
and is_enabled.
This framework is compiled for STM32MP1.
Change-Id: I5119a2aeaf103ceaae7a60d9e423caf0c148d794
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Warnings about header files include order were triggered by CI.
Correct the include order to mathc CI requirements.
Change-Id: Iaca959add924e0e1fa2e56fab2348f0ee36e5fa7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Protect the UART instance used for serial boot
with UART used for console.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ieee1557b34e7baa81594c3fbf0513191737027bf
Use stm32mp_uart_console_setup() in SP_min setup.
Adapt the function stm32mp_uart_console_setup() for BL32 (no reset, add
CONSOLE_FLAG_RUNTIME under DEBUG.
Change-Id: Ib2d35c8d285dafb680aa218872ad679cbf43d0ed
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Use newly created function stm32mp_uart_console_setup().
And remove now useless code.
Change-Id: Ib8d0319d3f4f54309848bc225b58608cea73bad9
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To ease console configuration, a dedicated function is created:
stm32mp_uart_console_setup(). The code will also be common for the
different BLs.
Change-Id: Idf3cad756f125ca2313cf30b1311637a9df8f27f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add function stm32_get_boot_interface to get the current boot interface
from information saved in the TAMP register.
Change-Id: I23af43c68eeaebe4c45920a57d739117aea3fbb1
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
The function stm32_save_boot_interface()is moved to stm32mp1_private.c
file. The files stm32mp1_context.{c,h} are removed.
As return is always 0, change the function to return void.
Call it earlier, to be able to use it when configuring console.
Change-Id: I8986e1257dc8e8708eab044a51ea1f2426b16597
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Those pins are configured by ROM code, for serial boot use cases.
Their configs are reset if the boot is done on UART, but not on USB.
This should then be done in TF-A. This has to be done after clock
init, and before console is configured.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I29a9694e25fcf1665360dd71f73937f769c43b52
Add set_gpio_reset_cfg() to set a pin in its reset configuration:
analog, no-pull, speed low, and its secure configuration, thanks to
stm32_gpio_is_secure_at_reset().
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I7b73c3636859f97fcc57f81cf68b42efc727922e
Sort the compilation flags in platform.mk when checking and defining
them for C files.
Change-Id: I5a08399c89ede4c0bd8697045706122732205db5
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Thanks to dyn_cfg_dtb_info_get_index(), we can check if TOS_FW_CONFIG
is inside the FIP partition. If not we can skip its treatment when
populating FIP images.
Change-Id: If5623eabd1ba484549d4a908d4a6f43325b36875
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Handle boot from UART with STM32CubeProgammer based on mmap io
for STM32MP15.
Depends-On: Iba84e8dfd67b9f30416efb0f6778e48ba1f75dad
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ibd719dd46a11da78633728675ef6639635b6cf67
Add a file to support the STMicroelectronics tool STM32CubeProgrammer
over UART in BL2 for STM32MP15x platform.
This tools is based on protocol defined in AN5275,
"USB DFU/USART protocols used in STM32MP1 Series bootloaders"
based on STM32 MCU protocols (AN3155, "USART protocol used
in the STM32 bootloader").
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: I956c95d8de0a94d1eb8e61f043651dae7b838170
Correctly handle USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION request
in USB driver and support a different result than
USB_DESC_TYPE_CONFIGURATION with the new optional ops
get_other_speed_config_desc().
The support of this descriptor is optionnal and is only
required when high-speed capable device which can operate at its
other possible speed.
This patch allows to remove the pbuf update in usb_core_get_desc()
and solves an issue on USB re-enumeration on STM32MP15 platform
as the result of get_config_desc() is a const array.
This issue is not see on normal use-case, as the USB enumeration
is only done in ROM code and TF-A reuse the same USB descritors.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I8edcc1e45065ab4e45d48f4bc37b49120674fdb0
Replace double space with single space in stm32cubeprogrammer_usb.c.
Change-Id: I717b136119e85fe8e25dd540758525f995200458
Signed-off-by: Yann Gautier <yann.gautier@st.com>
