For an easier debug on Aarch32, in case of abort, it is useful to access
DFSR, IFSR, DFAR and IFAR CP15 registers.
Change-Id: Ie6b5a2882cd701f76e9d455ec43bd4b0fbe3cc78
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This patch adds two helper functions:
- plat_ic_raise_ns_sgi to raise a NS SGI
- plat_ic_raise_s_el1_sgi to raise a S-EL1 SGI
Signed-off-by: Florian Lugou <florian.lugou@provenrun.com>
Change-Id: I6f262dd1da1d77fec3f850eb74189e726b8e24da
This patch adds the FF-A programming model in the test
secure payload to ensure that it can be used to test
the following spec features.
1. SP initialisation on the primary and secondary cpus.
2. An event loop to receive direct requests and respond
with direct responses.
3. Ability to receive messages that indicate power on
and off of a cpu.
4. Ability to handle a secure interrupt.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Shruti <shruti.gupta@arm.com>
Change-Id: I81cf744904d5cdc0b27862b5e4bc6f2cfe58a13a
QARMA3 is a pointer authentication algorithm that generates
the PAC codes.
The is_armv8_3_pauth_present() helper was modified in order to
consider the presence of the QARMA3 algorithm (i.e.: when
ID_AA64ISAR2_EL1.{GPA3, APA3} fields are not 0.
In addition, helper is_feat_pacqarma3_present() was implemented to
explicitly detect the presence of QARMA3 algorithm.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: I68e8fa7f8b7ca50d74ae0a2f5f182236d68f3d7b
FEAT_RNG_TRAP introduces support for EL3 trapping of reads of the
RNDR and RNDRRS registers, which is enabled by setting the
SCR_EL3.TRNDR bit. This patch adds a new build flag
ENABLE_FEAT_RNG_TRAP that enables the feature.
This feature is supported only in AArch64 state from Armv8.5 onwards.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: Ia9f17aef3444d3822bf03809036a1f668c9f2d89
This change adds "FEAT_TRBE" to be part of feature detection mechanism.
Previously feature enablement flags were of boolean type, containing
either 0 or 1. With the introduction of feature detection procedure
we now support three states for feature enablement build flags(0 to 2).
Accordingly, "ENABLE_TRBE_FOR_NS" flag is now modified from boolean
to numeric type to align with the feature detection.
Change-Id: I53d3bc8dc2f6eac63feef22dfd627f3a48480afc
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
This change adds "FEAT_BRBE" to be part of feature detection mechanism.
Previously feature enablement flags were of boolean type, possessing
either 0 or 1. With the introduction of feature detection procedure
we now support three states for feature enablement build flags(0 to 2).
Accordingly, "ENABLE_BRBE_FOR_NS" flag is now modified from boolean
to numeric type to align with the feature detection.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I1eb52863b4afb10b808e2f0b6584a8a210d0f38c
This patch fixes the following encodings in the System register
encoding space for the MPAM registers. The encodings now match
with the Arm® Architecture Reference Manual Supplement for MPAM.
* MPAMVPM0_EL2
* MPAMVPM1_EL2
* MPAMVPM2_EL2
* MPAMVPM3_EL2
* MPAMVPM4_EL2
* MPAMVPM5_EL2
* MPAMVPM6_EL2
* MPAMVPM7_EL2
* MPAMVPMV_EL2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ib339412de6a9c945a3307f3f347fe7b2efabdc18
Cortex-A710 erratum 2008768 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r2p0, and is fixed in r2p1. The workaround is to clear
the ED bit in each ERXCTLR_EL1 register before setting the PWRDN bit in
CPUPWRCTLR_EL1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ib2171c06da762dd4155b02c03d86766f1616381d
This patch enables access to the branch record buffer control registers
in non-secure EL2 and EL1 using the new build option ENABLE_BRBE_FOR_NS.
It is disabled for all secure world, and cannot be used with ENABLE_RME.
This option is disabled by default, however, the FVP platform makefile
enables it for FVP builds.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I576a49d446a8a73286ea6417c16bd0b8de71fca0
Previously the SCR_EL3.AMVOFFEN bit was set for all contexts, this
behavior is incorrect as it allows secure world to access the virtual
offset registers when it should not be able to. This patch only sets
AMVOFFEN for non-secure world.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I2c61fe0a8a0092df089f1cb2c0d8a45c8c8ad0d3
This patch adds architectural features detection procedure to ensure
features enabled are present in the given hardware implementation.
It verifies whether the architecture build flags passed during
compilation match the respective features by reading their ID
registers. It reads through all the enabled feature specific ID
registers at once and panics in case of mismatch(feature enabled
but not implemented in PE).
Feature flags are used at sections (context_management,
save and restore routines of registers) during context switch.
If the enabled feature flag is not supported by the PE, it causes an
exception while saving or restoring the registers guarded by them.
With this mechanism, the build flags are validated at an early
phase prior to their usage, thereby preventing any undefined action
under their control.
This implementation is based on tristate approach for each feature and
currently FEAT_STATE=0 and FEAT_STATE=1 are covered as part of this
patch. FEAT_STATE=2 is planned for phase-2 implementation and will be
taken care separately.
The patch has been explicitly tested, by adding a new test_config
with build config enabling majority of the features and detected
all of them under FVP launched with parameters enabling v8.7 features.
Note: This is an experimental procedure and the mechanism itself is
guarded by a macro "FEATURE_DETECTION", which is currently being
disabled by default.
The "FEATURE_DETECTION" macro is documented and the platforms are
encouraged to make use of this diagnostic tool by enabling this
"FEATURE_DETECTION" flag explicitly and get used to its behaviour
during booting before the procedure gets mandated.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: Ia23d95430fe82d417a938b672bfb5edc401b0f43
Add new options SEPARATE_BL2_NOLOAD_REGION to separate no-loadable
sections (.bss, stack, page tables) to a ram region specified
by BL2_NOLOAD_START and BL2_NOLOAD_LIMIT.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I844ee0fc405474af0aff978d292c826fbe0a82fd
The previous delegating/undelegating sequence was incorrect as per the
specification DDI0615, "Architecture Reference Manual Supplement, The
Realm Management Extension (RME), for Armv9-A" Sections A1.1.1 and
A1.1.2
Off topic:
- cleaning the gpt_is_gpi_valid and gpt_check_pass_overlap
Change-Id: Idb64d0a2e6204f1708951137062847938ab5e0ac
Signed-off-by: Robert Wakim <robert.wakim@arm.com>
Add tsp service to check the value of the PSTATE DIT bit is as
expected and toggle it's value. This is used to ensure that
the DIT bit is maintained during a switch from the Normal to
Secure worlds and back.
Change-Id: I4e8bdfa6530e5e75925c0079d4fa2795133c5105
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
During a transition to a higher EL some of the PSTATE bits are not set
by hardware, this means that their state may be leaked from lower ELs.
This patch sets those bits to a default value upon entry to EL3.
This patch was tested using a debugger to check the PSTATE values
are correctly set. As well as adding a test in the next patch to
ensure the PSTATE in lower ELs is still maintained after this change.
Change-Id: Ie546acbca7b9aa3c86bd68185edded91b2a64ae5
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
FEAT_CCIDX modifies the register fields in CCSIDR/CCSIDR2 (aarch32)
and CCSIDR_EL1 (aarch64). This patch adds a check to the do_dcsw_op
function to use the right register format rather than assuming
that FEAT_CCIDX is not implemented.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I12cd00cd7b5889525d4d2750281a751dd74ef5dc
This patch adds two new compile time options to enable SME in TF-A:
ENABLE_SME_FOR_NS and ENABLE_SME_FOR_SWD for use in non-secure and
secure worlds respectively. Setting ENABLE_SME_FOR_NS=1 will enable
SME for non-secure worlds and trap SME, SVE, and FPU/SIMD instructions
in secure context. Setting ENABLE_SME_FOR_SWD=1 will disable these
traps, but support for SME context management does not yet exist in
SPM so building with SPD=spmd will fail.
The existing ENABLE_SVE_FOR_NS and ENABLE_SVE_FOR_SWD options cannot
be used with SME as it is a superset of SVE and will enable SVE and
FPU/SIMD along with SME.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Iaaac9d22fe37b4a92315207891da848a8fd0ed73
This patch removes files that are not used by TF-R as well as
removes unused generic files from the TF-R makefile.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Idb15ac295dc77fd38735bf2844efdb73e6f7c89b
MPMM - the Maximum Power Mitigation Mechanism - is an optional
microarchitectural feature present on some Armv9-A cores, introduced
with the Cortex-X2, Cortex-A710 and Cortex-A510 cores.
MPMM allows the SoC firmware to detect and limit high activity events
to assist in SoC processor power domain dynamic power budgeting and
limit the triggering of whole-rail (i.e. clock chopping) responses to
overcurrent conditions.
This feature is enabled via the `ENABLE_MPMM` build option.
Configuration can be done via FCONF by enabling `ENABLE_MPMM_FCONF`, or
by via the plaform-implemented `plat_mpmm_topology` function.
Change-Id: I77da82808ad4744ece8263f0bf215c5a091c3167
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change removes the `AMU_GROUP0_COUNTERS_MASK` and
`AMU_GROUP0_MAX_COUNTERS` preprocessor definitions, instead retrieving
the number of group 0 counters dynamically through `AMCGCR_EL0.CG0NC`.
Change-Id: I70e39c30fbd5df89b214276fac79cc8758a89f72
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change introduces a small set of register getters and setters to
avoid having to repeatedly mask and shift in complex code.
Change-Id: Ia372f60c5efb924cd6eeceb75112e635ad13d942
Signed-off-by: Chris Kay <chris.kay@arm.com>
Currently on image entry, the data cache in the RW address range is
invalidated before MMU is enabled to safeguard against potential
stale data from previous firmware stage. If PIE is enabled however,
RO sections including the GOT may be also modified during pie fixup.
Therefore, to be on the safe side, invalidate the entire image
region if PIE is enabled.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I7ee2a324fe4377b026e32f9ab842617ad4e09d89
Following system registers are modified before exiting EL2 to allow
u-boot/Linux to boot
1. CNTHCTL_EL2.EL1PCTEN -> 1
Allows U-boot to use physical counters at EL1
2. VTCR_EL2.MSA -> 1
Enables VMSA at EL1, which is required by U-Boot and Linux.
3. HCR_EL2.APK = 1 & HCR_EL2.API = 1
Disables PAuth instruction and register traps in EL1
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I58f45b6669a9ad1debb80265b243015c054a9bb1
This patch updates and refactors the GPT library and fixes bugs.
- Support all combinations of PGS, PPS, and L0GPTSZ parameters.
- PPS and PGS are set at runtime, L0GPTSZ is read from GPCCR_EL3.
- Use compiler definitions to simplify code.
- Renaming functions to better suit intended uses.
- MMU enabled before GPT APIs called.
- Add comments to make function usage more clear in GPT library.
- Added _rme suffix to file names to differentiate better from the
GPT file system code.
- Renamed gpt_defs.h to gpt_rme_private.h to better separate private
and public code.
- Renamed gpt_core.c to gpt_rme.c to better conform to TF-A precedent.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I4cbb23b0f81e697baa9fb23ba458aa3f7d1ed919
This patch introduces the RMM dispatcher into BL31. This
will be the mechanism that will enable communication to
take place between the Realm and non-secure world. Currently
gives the capability for granules to be
transitioned from non-secure type to realm and vice versa.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Change-Id: I1fdc99a4bdd42bc14911aa0c6954b131de309511
This patch enables BL2 to run in root world (EL3) which is
needed as per the security model of RME-enabled systems.
Using the existing BL2_AT_EL3 TF-A build option is not convenient
because that option assumes TF-A BL1 doesn't exist, which is not
the case for RME-enabled systems. For the purposes of RME, we use
a normal BL1 image but we also want to run BL2 in EL3 as normally as
possible, therefore rather than use the special bl2_entrypoint
function in bl2_el3_entrypoint.S, we use a new bl2_entrypoint
function (in bl2_rme_entrypoint.S) which doesn't need reset or
mailbox initialization code seen in the el3_entrypoint_common macro.
The patch also cleans up bl2_el3_entrypoint.S, moving the
bl2_run_next_image function to its own file to avoid duplicating
code.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I99821b4cd550cadcb701f4c0c4dc36da81c7ef55
This patch adds new register and bit definitions for the Armv9-A
Realm Management Extension (RME) as described in the Arm
document DDI0615 (https://developer.arm.com/documentation/ddi0615/latest).
The patch also adds TLB maintenance functions and a function to
detect the presence of RME feature.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I03d2af7ea41a20a9e8a362a36b8099e3b4d18a11
Adding load, authentication, and transfer functionality from FVP R BL1 to
BL33, which will be the partner runtime code.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I293cad09739dacac0d20dd57c1d98178dbe84d40
For v8-R64, especially R82, creating code to run BL1 at EL2, using MPU.
Signed-off-by: Gary Morrison <gary.morrison@arm.com>
Change-Id: I439ac3915b982ad1e61d24365bdd1584b3070425
FEAT_HCX adds the extended hypervisor configuration register (HCRX_EL2)
and access to this register must be explicitly enabled through the
SCR_EL3.HXEn bit. This patch adds a new build flag ENABLE_FEAT_HCX to
allow the register to be accessed from EL2.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ibb36ad90622f1dc857adab4b0d4d7a89456a522b
Introduced a build flag 'ENABLE_TRF_FOR_NS' to enable trace filter
control registers access in NS-EL2, or NS-EL1 (when NS-EL2 is
implemented but unused).
Change-Id: If3f53b8173a5573424b9a405a4bd8c206ffdeb8c
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Trap bits of trace filter control registers access are in
architecturally UNKNOWN state at boot hence
1. Initialized trap bits to one to prohibit trace filter control
registers accesses in lower ELs (EL2, EL1) in all security states
when FEAT_TRF is implemented.
2. These bits are RES0 when FEAT_TRF is not implemented and hence set
it to zero to aligns with the Arm ARM reference recommendation,
that mentions software must writes RES0 bits with all 0s.
Change-Id: I1b7abf2170ece84ee585c91cda32d22b25c0fc34
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Introduced a build flag 'ENABLE_SYS_REG_TRACE_FOR_NS' to enable trace
system registers access in NS-EL2, or NS-EL1 (when NS-EL2 is
implemented but unused).
Change-Id: Idc1acede4186e101758cbf7bed5af7b634d7d18d
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Trap bits of trace system registers access are in architecturally
UNKNOWN state at boot hence
1. Initialized trap bits to one to prohibit trace system registers
accesses in lower ELs (EL2, EL1) in all security states when system
trace registers are implemented.
2. These bits are RES0 in the absence of system trace register support
and hence set it to zero to aligns with the Arm ARM reference
recommendation,that mentions software must writes RES0 bits with
all 0s.
Change-Id: I4b6c15cda882325273492895d72568b29de89ca3
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Introduced a build flag 'ENABLE_TRBE_FOR_NS' to enable trace buffer
control registers access in NS-EL2, or NS-EL1 (when NS-EL2 is
implemented but unused).
Change-Id: I285a672ccd395eebd377714c992bb21062a729cc
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Trap bits of trace buffer control registers access are in
architecturally UNKNOWN state at boot hence
1. Initialized these bits to zero to prohibit trace buffer control
registers accesses in lower ELs (EL2, EL1) in all security states
when FEAT_TRBE is implemented
2. Also, these bits are RES0 when FEAT_TRBE is not implemented, and
hence setting it to zero also aligns with the Arm ARM reference
recommendation, that mentions software must writes RES0 bits with
all 0s
Change-Id: If2752fd314881219f232f21d8e172a9c6d341ea1
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
The SDEI specification now says that during an SDEI
event handler dispatch the SPSR should be set according
to the TakeException() pseudocode function defined in
the Arm Architecture Reference Manual. This patch sets
the SPSR according to the function given in
ARM DDI 0487F.c page J1-7635
Change-Id: Id2f8f2464fd69c701d81626162827e5c4449b658
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Enables SVE support for the secure world via ENABLE_SVE_FOR_SWD.
ENABLE_SVE_FOR_SWD defaults to 0 and has to be explicitly set by the
platform. SVE is configured during initial setup and then uses EL3
context save/restore routine to switch between SVE configurations for
different contexts.
Reset value of CPTR_EL3 changed to be most restrictive by default.
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I889fbbc2e435435d66779b73a2d90d1188bf4116
BTI instructions are a part of the NOP space in earlier architecture
versions, so it's not inherently incorrect to enable BTI code
or instructions even if the target architecture does not support them.
This change reduces our reliance on architecture versions when checking
for features.
Change-Id: I79f884eec3d65978c61e72e4268021040fd6c96e
Signed-off-by: Chris Kay <chris.kay@arm.com>
This patch adds setting MDCR_EL3.MCCD in 'el3_arch_init_common'
macro to disable cycle counting by PMCCNTR_EL0 in EL3 when
FEAT_PMUv3p7 is implemented. This fixes failing test
'Leak PMU CYCLE counter values from EL3 on PSCI suspend SMC'
on FVP models with 'has_v8_7_pmu_extension' parameter set to
1 or 2.
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Change-Id: I2ad3ef501b31ee11306f76cb5a61032ecfd0fbda
