This fix solves problems with using PRI*PTR on aarch64 like so:
error: format '%x' expects argument of type 'unsigned int', but
argument 3 has type 'uintptr_t' {aka 'long unsigned int'}
Change-Id: I135d3e5cea5459f138b20331b5e9472e2e9e566c
Signed-off-by: K <kayo@illumium.org>
MISRA Violation: MISRA-C:2012 R.4.6
- Using basic numerical type int rather than a typedef
that includes size and signedness information.
Signed-off-by: HariBabu Gattem <haribabu.gattem@amd.com>
Change-Id: I3779f7b6e074e33cb66ace3bef2117029badce1e
Allow early console to be used at the beginning of SP_min, before
the clocks and UART have been reconfigured.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I53d66938d42fcec830d9b81e5ef62b3790d0c3b3
The new flag STM32MP_RECONFIGURE_CONSOLE is managed in platform.mk.
It is used in stm32mp_setup_early_console() when calling
plat_crash_console_init(). This call is also under:
"#if defined(IMAGE_BL2)"
as this crash console init shouldn't be done by default in BL32.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ib6b89db83d80095b662a2016e18ceb3fa8668435
If the flag STM32MP_RECONFIGURE_CONSOLE is set in BL32, the UART init
should be skipped if the UART clock is set to zero. This will be used
when configuring the default console, after an early console has been
configured.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Icbc640c7bdd6342f9c3ec1586a0d0c64127b18b8
This flag will be used in BL32, to reconfigure UART parameters for
the early or crash console. By default, it is zero, as UART is
already configured in BL2.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I7b28ff489479ab04a2fade027933524cdd36e959
When the early console is configured with STM32MP_EARLY_CONSOLE,
display a message indicating it is enabled.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Iafdfa5afef27eba823d707841853a8a46de0b42d
When a FIQ occurs and is trapped by SP_min, it is an unrecoverable
error. As kernel may have switched the UART console off, we should
re-enable it with plat_crash_console_init() for those failing states.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ib02e1271b6213f8e383a062b74494abf8826188f
Add the pincontrol configuration and clock enable in UART driver
with information found in the device tree.
This patch avoids an issue on STM32MP13x platform because the UART
configuration is reset by the ROM code for UART serial boot
(STM32MP_UART_PROGRAMMER=1).
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I575fd0e1026b857059abcfd4a3166eb3a239e1fd
Move the definition of DT_UART_COMPAT in stm32mp1_def.h to be used
in several files.
Change-Id: I74d0350bcd971df9b15697f2b9ec04061d6a7656
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
For product with 128MB DDR size, the OP-TEE is located at the end
of the DDR and the FIP can't be loaded at the default location
because it overlap the OP-TEE final location. So the default value
for DWL_BUFFER_BASE is invalid.
To avoid this conflict the serial boot load address = DWL_BUFFER_BASE
can be modified with a configuration flags.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: Ie27b87c10c57fea5d4c6200ce4f624e775b9a080
Update the FIP load address and size for serial boot to support
product with a DDR size = 128MB
1/ Move the FIP location at the end of the first 128MB
2/ Reduce the DWL_BUFFER_SIZE to 16MB, to be coherent with the value
indicated in USB enumeration
- for STM32MP13x: "@SSBL /0x03/1*16Me"
- for STM32MP15x: "@Partition3 /0x03/1*16Me"
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: Id93bf00c64832c17426bfd78e060861275677ecc
Add the possibility to configure the UART baudrate; reused the
console configuration, defined in STM32MP_UART_BAUDRATE.
The default value remains 115200.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: Ifcf2b36e8ac929265405bc88e824ee78be3b5bbb
The parameter over_sampling of stm32_uart_init_s is not required
as it can be computed dynamically from clock rate of the serial
device and the requested baudrate.
Oversampling by 8 is allowed only for higher speed
(up to clock_rate / 8) to reduce the maximum receiver tolerance
to clock deviation.
This patch update the driver, the serial init struct and the
only user, the stm32cubeprogrammer over uart support.
Change-Id: I422731089730a288defeb7fa49886db65d0902b2
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
RD-N2* variants of Neoverse reference design platforms could be
configured to boot from SRAM or DRAM. Having ARM_BL31_IN_DRAM set to 1
within the common makefile would deter these platforms from having this
flexibility. Remove the default override configuration for
`ARM_BL31_IN_DRAM`.
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I8d79969c003a984675cbe705de890b51a1f7f4ea
Update SRAM size for Neoverse reference design platforms from 256KB to
512KB. This is required to place and execute BL31 image from the
on-chip SRAM. Additionally, revise BL31 image size to accommodate
larger BL31 images of multi-chip platforms.
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I11c2672a1089f24a9fafcf6555b8e1d52032cfde
* changes:
refactor(mt8188): move platform_def.h to mt8188/include
feat(mt8188): add MCUSYS support
feat(mt8188): add armv8.2 support
feat(mt8188): add DFD control in SiP service
feat(mt8188): add EMI MPU basic drivers
feat(mt8188): add DCM driver
feat(mt8188): add reset and poweroff functions
feat(mediatek): add more flexibility of mtk_pm.c
feat(mediatek): add more options for build helper
feat(mt8188): add LPM driver support
feat(mt8188): apply ERRATA for CA-78
fix(mediatek): remove unused cold_boot.[c|h]
fix(mediatek): wrap cold_boot.h with MTK_SIP_KERNEL_BOOT_ENABLE
feat(mt8186): add EMI MPU support for SCP and DSP
It is more suitable to place platform_def.h in mt8188/include.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I35720690ff4f2ca99c9430edb8bbe17edf9aefb9
Add MCUSYS drivers support for MT8188.
Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
Change-Id: I84107702a9fd021c37d2997ad25b321a483a1a66
DFD (Design for Debug) is a debugging tool, which scans flip-flops and
dumps to internal RAM on the WDT reset. After system reboots, those
values could be showed for debugging.
TEST=build pass.
BUG=b:244216434
Signed-off-by: Fengquan Chen <fengquan.chen@mediatek.corp-partner.google.com>
Change-Id: I468036131e941a46bc1ec12d33105146000730d8
DCM means dynamic clock management, and it can dynamically
slow down or gate clocks during CPU or bus idle.
1. Add MCUSYS related DCM drivers.
2. Enable MCUSYS related DCM by default.
Signed-off-by: Garmin Chang <garmin.chang@mediatek.com>
Change-Id: I131354d72bbc190af504e9639bcc85a720e2bb17
To use power manager function more easier, we add some drivers to let
the implementation easier.
Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
Change-Id: Ibc6e1680c4534592ed37de49da39b6667f468ea1
To support more LPM feature, we add more options for build helper.
Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
Change-Id: I17eeedbe0674e321f1891074ba0c72d858841dae
We are not using cold_boot.[c|h] for mt8188, so remove them first.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I721aca37d5fb422f274bb1ab46150e1eddf7c480
We should wrap cold_boot.h with MTK_SIP_KERNEL_BOOT_ENABLE to avoid
build error.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Idfd760fbb7c782d4fc9de674d86a7123e0129c0d
- Removing platform dependencies from libc modules.
- Replacing panicking with actual error handling.
- Debug macros are included indirectly from assert.h. Removing
"platform_def.h" from assert.h and adding "common/debug.h"
where the macros are used.
- Removing hack for fixing PLAT_LOG_LEVEL_ASSERT to 40.
Instead removing assert with expression, as this
does not provide additional information.
Signed-off-by: Claus Pedersen <claustbp@google.com>
Change-Id: Icc201ea7b63c1277e423c1cfd13fd6816c2bc568
Recently new Xilinx Versal NET platform has been merged but documentation
cover only zynqmp. Fix the fragment to cover all Xilinx documentation.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: I10f8f865ca8d46518135adb80ba0ba4470534529
QEMU COSIM platform is equivalent to qemu with additional cosim
extensions, so just switching platform_id to QEMU if QEMU_COSIM is
detected.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: I922d10b1605c7f900158fa7fbe82571d3b9d4792
Increase the max possible size of BL33 from 1MB to 2MB.
For example, edk2 is usually bigger than 1MB
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Change-Id: Idd4762e25e623de145c65f31cf2dfe1fee466a74
* changes:
feat(versal-net): add support for platform management
feat(versal-net): add support for IPI
feat(versal-net): add SMP support for Versal NET
feat(versal-net): add support for Xilinx Versal NET platform
feat(versal-net): add documentation for Versal NET SoC
Fix the "#if defined(FOO)" usage introduced by commit 7c2fe62f1
("fix(bl31): allow use of EHF with S-EL2 SPMC") since the defines are
always passed as -DFOO=0 or as -DFOO=1. The "#if defined(FOO)" will now
always be true which is wrong.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I84fb144debc9899727a1fc021acdd59b4a6f0171
Add support for PM EEMI interface for Versal_net. Also use PM
APIs in psci ops. Added TFA_NO_PM flag to disable PM functionality.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: If2b2941c868bc9b0850d7f3adb81eac0e660c149
