Define common register macro both for Cortex-A53 and Cortex-A72
because the code will be used by both Cortex platform.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I485661bfe3ed4f214c403ff6af53dc6af1ddf089
Add CCI and EPU base address definiton for Chassis v3.2.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I13250555b6646c1e7ba2e9d7c9efca8501f17b3a
EMI MPU stands for external memory interface memory protect unit.
MT8195 supports 32 regions and 16 domains.
We add basic drivers currently, and will add more setting for
EMI MPU in next patch.
Change-Id: Iedc19d8f6fcf1ceb2d8241319b8dc17c885642dd
Signed-off-by: Penny Jan <penny.jan@mediatek.com>
This patch enables Trusted Boot on the i.MX8MP with BL2 doing image
verification from a FIP prior to hand-over to BL31.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: Iac1d1d62ea9858f67326a47c1e5ba377f23f9db5
Adds bl2 with FIP to the build required for mbed Linux booting where
we do:
BootROM -> SPL -> BL2 -> OPTEE -> u-boot
If NEED_BL2 is specified then BL2 will be built and BL31 will have its
address range modified upwards to accommodate. BL31 must be loaded from a
FIP in this case.
If NEED_BL2 is not specified then the current BL31 boot flow is unaffected
and u-boot SPL will load and execute BL31 directly.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I78914d6002755f733ea866127cb47982a00f9700
This commit makes the image load logic from imx8mm common for all
imx8m platform.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: Ibfe2e9cc09d198cb9e309afaf381a0237a4b82ed
Adds a number of definitions consistent with the established RSB3720
equivalents specifying number of io_handles and block devices.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I401e48216d67257137351ee4d0b98904a76fa789
This commit makes imx image io-storage logic common for all
imx platform.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I15045ac8f9dfa8cb714e32f9e7475d5eae4e86e4
Allows for exporting of FIP related methods cleanly in a private header.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: Iaaad4e69ef89c8a8a74648647d7fd09cd0fdd12a
In the SCMI power domain off handling, configure GIC
to prevent interrupt toward to the core to be turned off,
and configure CCN to disable coherency when the cluster is turned off.
The same operation is done in SCPI power domain off processing.
This commit adds the missing operation in SCMI power domain
off handling.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: Ib3523de488500c2e8bdc74e4cb8772a1442d9781
In case the WDT is enabled by prior stage, keep it enabled.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ie7c0eaf2f59dd8c30a9ef686a7000424f38d6352
In case MFISBTSTSR bit 4 is 1, that means the loader was started as
B-side. Load the remaining boot components from 8 MiB offset.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I11d882f30ca4f0cf55fd28d3470ff1063d350d10
Because the Realtime module stop control register n (RMSTPCRn)
are not supported in R-Car D3. Therefore, remove access to these
registers in R-Car D3.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I4647e28d0e176ff97151e9842019ba12cefe5c03
- Added the condition where output the SSCG (MD12) setting
to log for R-Car D3.
- Added the process to switching the bit rate of SCIF by the
SSCG (MD12) setting value for R-Car D3.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: Iaf07fa4df12dc233af0b57569ee4fa9329f670a9
Because the x6 and x7 registers will be overwritten by the callee function,
added the processing the register's value push to/pop from stack memory.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I5351a008d3b208a30a8bc8651b8d9b4d1a02a8e8
Modified the operation register to clearing the state bit of
the SYSCISR register from SYSCISR to SYSCISCR.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I9a0820b6414425fa2f4197f60852137827414a4d
Added the process of SYSECEXTMASK bit set/clear for following
power Resume/Shutoff flow.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I71ed22840a42e7ab7d87bfd4241eec6f5ddb129b
The memory area size of OP-TEE was changed from 1MB to 2MB
because the size of OP-TEE has increased.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: Ic8a165c83a3a9ef2829f68d5fabeed9ccb6da95e
The new M3 DRAM size can be determined by the PRR cut version.
Read the PRR cut version, and if it is older than cut 30, use
legacy DRAM size scheme, else report 8GB in 2GBx4 2ch split.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> # Fix DRAM size judgment by PRR register, reword commit message
Change-Id: Ib83176d0d09cab5cae0119ba462e42c66c642798
Fix to support of booting from eMMC (50MHz x 8) on
Draak board for R-Car D3.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I0ab2b5c7f8075acbf5f4a69694fb535dddc1a4c8
Added the process of judgment and logging for R-Car D3 Ver.1.1 and Ver.1.0.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I326aa42374b70b6a4a71893561a7eaa0b6eddef0
Changed the plat/renesas/common/common.mk to change the source files
about GICv2 by include gicv2.mk, because gic_common.c has deprecated.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: Iaa7eae6b2c1dd79a05339325e6bc422d87bce49e
This commit fixes a return value of console_rcar_init because it is
expected to return 1 on success but the function always returns 0.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I97a6800578e3c517c0c1e3c00dc75f0ef75e8778
This change refactors the SPMD to setup SPMC CPU contexts once and early
from spmd_spmc_init (single call to cm_setup_context rather than on each
and every warm boot).
Pass the core linear ID through a GP register as an implementation
defined behavior helping FF-A adoption to legacy TOSes (essentially
when secure virtualization is not used).
A first version of this change was originally submitted by Lukas [1].
Pasting below the original justification:
Our TEE, Kinibi, is used to receive the core linear ID in the x3
register of booting secondary cores.
This patch is necessary to bring up secondary cores with Kinibi as an
SPMC in SEL1.
In Kinibi, the TEE is mostly platform-independent and all platform-
specifics like topology is concentrated in TF-A of our customers.
That is why we don't have the MPIDR - linear ID mapping in Kinibi.
We need the correct linear ID to program the GICv2 target register,
for example in power management case.
It is not needed on GICv3/v4, because of using a fixed mapping from
MPIDR to ICDIPTR/GICD_ITARGETSRn register.
For debug and power management purpose, we also want a unified view to
linear id between Linux and the TEE.
E.g. to disable a core, to see what cores are printing a trace /
an event.
In the past, Kinibi had several other designs, but the complexity was
getting out of control:
* Platform-specific assembler macros in the kernel.
* A per-core SMC from Linux to tell the linear ID after the boot.
* With DynamiQ, it seems SIPs were playing with MPIDR register values,
reusing them between cores and changing them during boot.
[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/10235
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Lukas Hanel <lukas.hanel@trustonic.com>
Change-Id: Ifa8fa208e9b8eb1642c80b5f7b54152dadafa75e
This patch will fix the formatting errors concerning code snippet,
lines 245 and 256 respectively.
The code snippet is updated to 'shell' to lex it appropriately.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I53aefd81da350b6511e7a97b5fee7b0d6f9dde2d
Erratum 1530924 affects Armada 37xx CPU, since it affects all Cortex-A53
revisions from r0p0 to r0p4.
Enable the workaround for this erratum.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I753225040e49e956788d5617cd7ce76d5e6ea8e8
Describe the boot using FIP, and how to compile it.
The STM32IMAGE boot chain is still available but it is not recommended.
Update the build command lines, for FIP.
The memory mapping is also updated.
Change-Id: I2b1e0df5500b6213d33dc558b0e0da38340a4d79
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add a new function that allows to enable or disabled filters on
configured regions dynamically. This will avoid the need to
reconfigure the entire attribute and just manage to
enable/disable filters.
Change-Id: If0937ca755bec6c45d3649718147108459682fff
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
